A steel hulled Scalloper
HARMONI

for

Mark Roberts

Harmoni Checking scallop dredge doors Harmoni working at sea showing dredges and conveyor
            
A steel hulled Scalloper having double chine, transom stern, bulbous bow, soft nosed stem and rigged for Queenie and Clam fishing with 8 dredges per side and automated catch handling. Building fishroom in fabrication shed Balast fitted in box beam ready for welding up Good progress on fish room in fabrication shed
wk1 Building fishroom in fabrication shed.jpg (18228 bytes) wk2 Balast fitted in box beam ready for welding up.jpg (12516 bytes) wk2 Good progress on fish room  in fabrication shed.jpg (19950 bytes)
Fabrication of bulbous nose Fish room comes out of fabrication shed ready for lifting into position Crane takes up the 8.5 ton strain of the fish room Plating is now well under way After Christmas holidays work is now in full swing Jim & Steve fitting bulwarks Fabrication of deck housing in shed Deck housing leaves fabrication shed
wk03 Fabrication of bulbous nose.jpg (15945 bytes) wk04  Fish room comes out of fabrication shed ready for lifting into position.jpg (19065 bytes) wk05 Crane takes up the 8.5 ton strain of the fish room.jpg (17203 bytes) wk06 Plating is now well under way.jpg (16758 bytes) wk07 After Christmas holidays work is now in full swing.jpg (18744 bytes) wk08 Jim & Steve fitting bulwarks.jpg (17416 bytes) wk09 Fabrication of deck housing in shed.jpg (16680 bytes) wk10 Deck housing leaves fabrication shed.jpg (17276 bytes)
Birds eye view Jim checking accuracy Stearing gear fitted Below deck to be subdivided by four watertight bulkheads into :- Aft accommodation with steering gear, Engine room, Hold and Forepeak tank/gear store.
wk11 Jim checking accuracy.jpg (16489 bytes) wk11 Stearing gear fitted.jpg (17226 bytes)
Auxiliary engine Gearbox. Main engine arrives its a 3406 Caterpillar Jim&Steve negotiate Cat through aperture with a tight squeeze Welding plant comes aboard for repair & maintenance work at sea Aluminium for shelter deck arrives and laid out ready for welding Automated emptying door comes on board Emptying doors in place with queenie riddles
wk12 Auxiliary engine.jpg (17871 bytes) wk12 Gearbox.jpg (14186 bytes) wk12 Main engine arrives its a  3406 Caterpillar 400bhp 1800 rpm.jpg (19789 bytes) wk13 Jim&Steve negotiate Cat through aperture with a tight squeeze.jpg (19917 bytes) wk13 Welding plant comes aboard for repair & maintenance work at sea.jpg (16774 bytes) wk14 Aluminium for shelter deck arrives and laid out ready for welding.jpg (16243 bytes) wk15 Automated emptying door comes on board.jpg (18259 bytes) wk15 Emptying doors in place with queenie riddles .jpg (19134 bytes)
Main deck is to have an aft deckhouse for galley and mess with an Aluminum wheelhouse fitted over. Forward trawl winch, hinged outriggers, lifting gantry and Queenie riddles. Prop shaft fitted Hydraulic rams in place for lifting scallop emptying hoppers Internal view of scallop riddles with conveyer belt just in view
wk16 Prop shaft fitted into Harmoni.jpg (16195 bytes) wk17 Hydraulic rams in place for lifting scallop emptying hoppers.jpg (16946 bytes) wk19 enternal view of scallop riddles with conveyer belt just in view.jpg (14702 bytes)
Dredge lifting gallows and forward mast fitted also showing opening to conveyor belt Navigation & electronics being fitted to masts by Robbins marine electronics of Liverpool Harmani gets her name on stern & Tony fitting charm bars Covers removed from Harmoni and first coat of two pack primer now on Hydrolic oil tank and service diesel tank fitted in engine room Ice making plant installed in fish room Starboard side galley area
wk18 Dredge lifting gallows and forword mast fitted also showing opening to conveyor belt.jpg (15829 bytes) wk20 Navigation & electronics being fitted to masts by Robbins marine electronics of Liverpool.jpg (18942 bytes) wk21 Harmani gets her name on stern & Tony fitting charm bars.jpg (17136 bytes) wk22 Hydrolic oil tank and service diesel tank fitted in engine room.jpg (17589 bytes) wk23 Ice making plant installed in fish room.jpg (16932 bytes) wk24 Starboard side galley area.jpg (10762 bytes)
Removable panel for access to steering gear in accommodation block Urethane&coating systems setting up for insulation injecting Shower tiled out in Harmoni A full length Aluminum alloy shelter deck is to be fitted over the main deck. The shelter deck is to incorporate troughs, set into the deck at side over the length  of the dredge bars to receive the catch.
wk26 Removable panel for access to steering gear in accommodation block.jpg (14141 bytes) wk27 Urethane&coating systems setting up for insulation injecting.jpg (16788 bytes) wk29 Shower tiled out in Harmoni.jpg (13595 bytes)
Main Dimensions  Injecting PU foam insulation in fish room
Length Overall 14.99 meters 49' 2"
Length Register  14.17 meters  48' 6" wk28 Injecting PU foam insulation in fish room.jpg (14381 bytes)
Breadth moulded 6.10 20' 0"
Depth moulded  3.50 meters 11' 6"
Draught aft  3.45 meters    11' 4" Scallop hopper fitted into fish room.
Fuel capacity 9080 liters    2000 gallons
Fresh water capacity  2300 liters    500 gallons wk30 Scallop hopper fitted into fish room.jpg (14304 bytes)
Hold capacity  250 bags
Ice locker capacity  4 tones
Crew of Harmoni Glynne and grandson Inside Harmoni's wheel house

Launching of Harmoni

wk31 Crew of Harmoni.jpg (16341 bytes) wk31 Glynne and grandson.jpg (17353 bytes) wk32 Inside Harmoni's wheel house.jpg (18519 bytes)

Launch Date

5th June 2004

 

[Home]    [New Builds]    [Archie]    [Gallery]    [Directors]    [Repairs]    [Services]

Last updated 21/01/07
Photos by kind permission of Sid Weatherill (c)
Web page designed by Komtutor (c)
AddFreeStats